This is a 37 tooth, 428 sprocket of ATVs, street motorcycles, and dirt bikes.
This is an 12mm by 210mm axle bolt.
This is an 12mm by 240mm axle bolt.
This is an 15mm by 225mm axle bolt.
This axle spacer is 14.5mm long with a 20mm OD and a 13mm ID.
This axle spacer is 17mm long with a 20mm OD and a 13mm ID.
This axle spacer is 21mm long with a 20mm OD and a 13mm ID.
This is a 24mm X 13mm axle shim-spacer.
This axle spacer is 25mm long with a 20mm OD and a 13mm ID.
This axle spacer is 27mm long with a 20mm OD and a 15.25mm ID.
Master Cylinder, Rear Brake w reservoir - ATV and dirt bike
CG 175cc Cylinder Kit - 61.9mm - Loncin
PZ30 Carburetor - for 250cc Engines (Keihin)
150cc to 250cc Electric Starter - 11 spline, low mount
Carburetor - PZ19 with Cable Choke - Keihin
Rear brake master cylinder with reservoir for your Chinese made ATV or dirt bike.
Loncin cylinder kit for the 175cc (175cm³) CG style engine; 61.3mm piston - Includes; Piston, rings, wrist pin, cir-clips, cylinder, head gasket, and base gasket.
This is a Japanese designed (Keihin) PZ-30 carburetor with cable choke lever.
This 11 spline, low mount, starter fits many of the 150cc to 250cc vertical mount engines from China.
This Keihin PZ19 style carburetor will fit for 50cc, 70cc, 90cc, 100cc, 110cc or 125cc horizontal China made Honda Clone engines.
Carburetor - PZ19 - for 50cc, 70cc, 90cc, 100cc, 110cc engine - Keihin
Electronic Shift ECU - Odes 400cc ATV
Micro Switch - Left Side (type 2)
Stator - 6 windings with pickup
Switch- Kill Switch, Starter Button, Lights, High & Low Beam, Horn, Signal Lights
This PZ19 Keihin carburetor will fit 50cc to 110cc China made Honda Clone style engines.
An ECU (or Electronic Shift Unit) is for a Chinese ODES 400cc ATV.
A micro switch (left side) for a Chinese machine.
A six winding stator used on Loncin and other Honda clone engines from China. Also, for the 50cc and 125cc GY6 engines.
This switch is used on Chinese dual sport bikes and some ATVs.