11 1/2 inch kick stand for dirt bikes.
14 1/2 inch kick stand for dirt bikes.
This is a master link for a 25H chain.
This round rubber plug is for 3/4" OD tubing.
These gaskets go between the head of the engine and the exhaust pipe.If your unit has an exhaust leak by the engine this is likely theculprit.
38mm Diameter. These gaskets go between the head of the engine and the exhaust pipe.If your unit has an exhaust leak by the engine this is likely theculprit.
This is a 420 size chain with 120 links including the master link.
This is a master link for a 420 chain.
This is a master link for a 420H chain.
This is a master link for a 428 chain.
Master Cylinder, Rear Brake w reservoir - ATV and dirt bike
CG 175cc Cylinder Kit - 61.9mm - Loncin
PZ30 Carburetor - for 250cc Engines (Keihin)
150cc to 250cc Electric Starter - 11 spline, low mount
Carburetor - PZ19 with Cable Choke - Keihin
Rear brake master cylinder with reservoir for your Chinese made ATV or dirt bike.
Loncin cylinder kit for the 175cc (175cm³) CG style engine; 61.3mm piston - Includes; Piston, rings, wrist pin, cir-clips, cylinder, head gasket, and base gasket.
This is a Japanese designed (Keihin) PZ-30 carburetor with cable choke lever.
This 11 spline, low mount, starter fits many of the 150cc to 250cc vertical mount engines from China.
This Keihin PZ19 style carburetor will fit for 50cc, 70cc, 90cc, 100cc, 110cc or 125cc horizontal China made Honda Clone engines.
ATV Throttle Assembly with Micro Switch
Chain Guide - Swing Arm Protector
Micro Switch - Right Side (type 1)
Stator - 6 windings with pickup
This throttle assembly is for the right side of the handle bar and is the throttle and front drum brake lever.
This a galvanized M12x30 bolt 1.25 mm/thread
This chain guide is a small one used on small dirt bikes and pit bikes from China.
A micro switch (right side) for a Chinese machine.
A six winding stator used on Loncin and other Honda clone engines from China. Also, for the 50cc and 125cc GY6 engines.